IDES Prospector Already have an account? Login Here

IDES

Apec® DP 1-9359/5

Polycarbonate

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Apec® DP 1-9359/5 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • Mold Release
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
  • Thermoforming
  
Multi-Point Data 
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Melt volume-flow rate (330°C/2.16 kg)
in³/10min
 ISO 1133 2
Water Absorption
     ISO 62 2
Saturation
%
  
Equilibrium
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Impact
Nominal Value
Unit
Test Method
Charpy notched impact strength
     ISO 179/1eA 2
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy impact strength
     ISO 179/1eU 2
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Vicat Softening Temperature (50°C/h, B (50N))
°F
 ISO 306 2
CLTE
     ISO 11359-2 2
Flow
in/in/°F
  
Transverse
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Surface resistivity
ohm
 IEC 60093 2
Volume resistivity
ohm·in
 IEC 60093 2
Relative Permittivity
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250 2
100 Hz
 
  
1 MHz
 
  
Comparative tracking index
 
 IEC 60112 2
Electric strength
V/mil
 IEC 60243-1 2
Flammability
Nominal Value
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)
 
 ISO 1210 2
Burning Behav. at thickness h (0.118 in)
 
 ISO 1210 2
Oxygen index
%
 ISO 4589-2 2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Apec® DP 1-9359/5, Apec DP 193595, Apec® , Apec, ApecDP193595, DP 1, DP 1 9359 5, DP 1-9359/5, DP 193595, DP 1-9359:5, DP 1-9359+5, DP 1-9359-5, DP 1-9359_5, DP 1-9359 5, DP 1:9359/5, DP 1/9359/5, DP 1+9359/5, DP 1_9359/5, DP 1 9359/5, DP1, 19359, 93595, DP193595, DP 19359_5, DP 19359 5, DP 1_93595, DP 1 93595, DP19359_5, DP1_93595, Polycarbonate, PC, Bayer Euro, 1DP
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.