IDES Prospector Already have an account? Login Here

IDES

Desmopan® 365

Thermoplastic Polyurethane Elastomer

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Desmopan® 365 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • Hydrolysis Resistant
Features 
  • Hydrolysis Resistant
Uses 
  • Engineered Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus 3
psi
 ISO 178
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 4
lbf/in
 ISO 34-1
Additional Information
Impact resilience, ISO 4662, Annealed: 40%
Tear propagation resistance, ISO 34-1, Annealed, 500 mm/min: 180 kN/m
Torsional storage modulus, ISO 6721-2, Annealed, -20°C: 632 MPa
Torsional storage modulus, ISO 6721-2, Annealed, 23°C: 160 MPa
Torsional storage modulus, ISO 6721-2, Annealed, 70°C: 52 MPa
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Desmopan® 365, Desmopan 365, Desmopan® , Desmopan, Desmopan365, 365, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Bayer Euro, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.079 in/min
420 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.