IDES Prospector Already have an account? Login Here

IDES

Desmopan® 786 L

Thermoplastic Polyurethane Elastomer

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Desmopan® 786 L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Extrusion- and injection molding grade; high mechanical strength; very good hydrolysis and microbial resistance; good low-temperature flexibility; Application; Film hoses; Fire hoses; Profiles; Technical parts
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
 
Features 
  • High Strength
  • Hydrolysis Resistant
  • Low Temperature Flexibility
  • Microbe Resistant
 
Uses 
  • Engineering Parts
  • Hose
  • Profiles
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress 2
    DIN 53504
10% Strain
psi
 
50% Strain
psi
 
Abrasion Resistance
 
ISO 4662
Tensile Storage Modulus
    ISO 6721-1,-4
-4°F
psi
 
68°F
psi
 
140°F
psi
 
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress 3
    DIN 53504
100% Strain
psi
 
300% Strain
psi
 
Tensile Stress 3 (Break)
psi
DIN 53504
Tensile Elongation 3 (Break)
%
DIN 53504
Tear Strength 4
lbf/in
ISO 34-1
Compression Set
    ISO 815
73°F, 72.0 hr
%
 
158°F, 24.0 hr
%
 
Impact
Nominal Value
Unit
Test Method
Impact Resilience
%
ISO 4662
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
    ISO 868
Shore A
 
 
Shore D
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Desmopan® 786 L, Desmopan 786 L, Desmopan® , Desmopan, Desmopan786L, 786 L, 786L, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, Bayer Euro, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, L786
Features
Features may also be described by the following terms: Low Temperature Flexibility, High Strength.
Uses
Uses may also be described by the following terms: Engineering Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
2200 mm/min
37.9 in/min
420 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.