IDES Prospector Already have an account? Login Here

IDES

Desmopan® 585

Thermoplastic Polyurethane Elastomer (Polyester)

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Desmopan® 585 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
injection molding grade; high mechanical strength; antimicrobic grade; hydrolysis-stabilised; Application; Sports shoe soles
General  
Material Status 
  • Commercial: Discontinued
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Antimicrobial (Fungicide)
  • Hydrolysis Resistant
  
Features 
  • High Strength
  • Hydrolysis Resistant
  
Uses 
  • Footwear
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress     ISO 527-2 2
Break
psi
  
100% Strain
psi
  
300% Strain
psi
  
Tensile Strain (Break)
%
 ISO 527-2 2
Abrasion Resistance (73°F)
mm³
 ISO 4649
Tensile Storage Modulus     ISO 6721-1,-4
-4°F
psi
  
68°F
psi
  
140°F
psi
  
Torsional Storage Modulus     ISO 6721-2
-4°F
psi
  
73°F
psi
  
158°F
psi
  
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 3
lbf/in
 ISO 34-1
Compression Set     ASTM D395
73°F, 72.0 hr
%
  
158°F, 24.0 hr
%
  
Impact
Nominal Value
Unit
Test Method
Impact Resilience
%
 ISO 4662
Hardness
Nominal Value
Unit
Test Method
Shore Hardness     ISO 868 2
Shore A, 3 sec
 
  
Shore D, 15 sec
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Desmopan® 585, Desmopan 585, Desmopan® , Desmopan, Desmopan585, 585, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyester), Thermoplastic Polyurethane Elastomer Polyester, TPU-Polyester, TPUPolyester, TPU:Polyester, TPU/Polyester, TPU+Polyester, TPU_Polyester, TPU Polyester, Thermoplastic Polyurethane, TPU, Bayer Euro, ThermoplasticPolyurethaneElastomerPolyester, ThermoplasticPolyurethane
Features
Features may also be described by the following terms: High Strength.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
320 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.