IDES Prospector Already have an account? Login Here

IDES

TEDUR® L 9510-1

Polyphenylene Sulfide

Glass Fiber Reinforcement, 40%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for TEDUR® L 9510-1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Crystalline
  • Food Contact Acceptable
  • High Rigidity
  • High Strength
  
Uses 
  • Bushings
  • Housings
  • Pump Parts
  • Valves/Valve Parts
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Outer Fiber Strain
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Comparative Tracking Index (Solution A)
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0295 in
 
  
0.0591 in
 
  
0.118 in
 
  
Glow Wire Flammability Index
     IEC 60695-2-12
0.0394 in
°F
  
0.0787 in
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TEDUR® L 9510-1, TEDUR L 95101, TEDUR® , TEDUR, TEDURL95101, L 9510, L 9510-1, L 95101, L 9510:1, L 9510/1, L 9510+1, L 9510_1, L 9510 1, L9510, 95101, L95101, L9510_1, Polyphenylene Sulfide, PPS, Albis Euro, PolyphenyleneSulfide, 9510L
Features
Features may also be described by the following terms: High Strength, High Rigidity.
Uses
Uses may also be described by the following terms: Housings, Housing, Valves, Valve Parts.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.