IDES Prospector Already have an account? Login Here

IDES

POLYLUX® (MABS) Typ C2

Methyl Methacrylate / ABS

Supplied by A. Schulman Europe

The technical datasheet with complete property values for POLYLUX® (MABS) Typ C2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
good flow transparent MABS grade
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Appearance 
  • Clear/Transparent
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • MABS
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
%
ISO 527-2/1A/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
     
66 psi, Unannealed
°F
ISO 75-2/Bf
264 psi, Unannealed
°F
ISO 75-2/Af
Vicat Softening Temperature
     
--
°F
ISO 306/A50
--
°F
ISO 306/B50
Flammability
Nominal Value
Unit
Test Method
Glow Wire Flammability Index
    IEC 60695-2-12
0.0591 in
°F
 
0.118 in
°F
 
Glow Wire Ignition Temperature
    IEC 60695-2-13
0.0591 in
°F
 
0.118 in
°F
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYLUX® Typ C2, POLYLUX Typ C2, POLYLUX® (MABS) Typ C2, POLYLUX MABS Typ C2, POLYLUX® , POLYLUX, POLYLUXMABSTypC2, Typ C 2, Typ C2, MABS Typ C 2, TypC2, (MABS) Typ C2, MABS Typ C2, MABSTyp, TypC, C2, MABSTypC2, Methyl Methacrylate / ABS, Methyl Methacrylate ABS, Methyl Methacrylate : ABS, Methyl Methacrylate + ABS, Methyl Methacrylate - ABS, Methyl Methacrylate _ ABS, Methyl Methacrylate ABS, MABS, Methyl Methacrylate, MM, A. Schulman Eur, MethylMethacrylateABS, MethylMethacrylate, MethylMethacrylate_ABS, TypMABS, CTyp
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.