POLYLUX (MABS) Typ C4 A. Schulman Eur Methyl Methacrylate / ABS

Product Description

Transparent MABS for extrusion and parts of high wall thickness

General

Material Status

Availability

Uses

Appearance

Processing Method

Resin ID (ISO 1043)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYLUX® Typ C4, POLYLUX Typ C4, POLYLUX® (MABS) Typ C4, POLYLUX MABS Typ C4, POLYLUX® , POLYLUX, POLYLUXMABSTypC4, Typ C 4, Typ C4, MABS Typ C 4, TypC4, (MABS) Typ C4, MABS Typ C4, MABSTyp, TypC, C4, MABSTypC4, Methyl Methacrylate / ABS, Methyl Methacrylate ABS, Methyl Methacrylate : ABS, Methyl Methacrylate + ABS, Methyl Methacrylate - ABS, Methyl Methacrylate _ ABS, Methyl Methacrylate ABS, MABS, Methyl Methacrylate, MM, A. Schulman Eur, MethylMethacrylateABS, MethylMethacrylate, MethylMethacrylate_ABS, TypMABS, CTyp
Uses
Uses may also be described by the following terms: Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts.

Notes

¹Typical properties: these are not to be construed as specifications.

POLYLUX® (MABS) Typ C4