POLYLUX (MABS) Typ C5 A. Schulman Eur Methyl Methacrylate / ABS

Product Description
normal flow transparent MABS grade
General
Material Status	Commercial: Active
Availability	Europe
Appearance	Clear/Transparent
Processing Method	Injection Molding
Resin ID (ISO 1043)	MABS

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYLUX® Typ C5, POLYLUX Typ C5, POLYLUX® (MABS) Typ C5, POLYLUX MABS Typ C5, POLYLUX® , POLYLUX, POLYLUXMABSTypC5, Typ C 5, Typ C5, MABS Typ C 5, TypC5, (MABS) Typ C5, MABS Typ C5, MABSTyp, TypC, C5, MABSTypC5, Methyl Methacrylate / ABS, Methyl Methacrylate ABS, Methyl Methacrylate : ABS, Methyl Methacrylate + ABS, Methyl Methacrylate - ABS, Methyl Methacrylate _ ABS, Methyl Methacrylate ABS, MABS, Methyl Methacrylate, MM, A. Schulman Eur, MethylMethacrylateABS, MethylMethacrylate, MethylMethacrylate_ABS, TypMABS, CTyp

Notes

¹Typical properties: these are not to be construed as specifications.

POLYLUX® (MABS) Typ C5