POLYMAN (ABS) HH 3 D A. Schulman Eur Acrylonitrile Butadiene Styrene

Product Description

heat resistant ABS grade with high flow; also available as low emission grade

General

Material Status

Availability

Processing Method

Resin ID (ISO 1043)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Yield)		psi	ISO 527-2/1A/50
Tensile Strain (Yield)		%	ISO 527-2/1A/50
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index		V	IEC 60112
Flammability	Nominal Value	Unit	Test Method
Flammability Classification (0.0591 in)			IEC 60695-11-10, -20
Glow Wire Flammability Index			IEC 60695-2-12
0.0591 in		°F
0.118 in		°F
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYMAN® HH 3 D, POLYMAN HH 3 D, POLYMAN® (ABS) HH 3 D, POLYMAN ABS HH 3 D, POLYMAN® , POLYMAN, POLYMANABSHH3D, HH 3 D, HH3D, (ABS) HH 3 D, ABS HH 3 D, ABSHH, HH3, 3D, ABSHH3D, Acrylonitrile Butadiene Styrene, ABS, A. Schulman Eur, AcrylonitrileButadieneStyrene, HHABS, 3HH

Notes

¹Typical properties: these are not to be construed as specifications.

POLYMAN® (ABS) HH 3 D