IDES Prospector Already have an account? Login Here

IDES

SCHULAMID® 6 GB 30

Polyamide 6

Glass Bead, 30%

Supplied by A. Schulman Europe

The technical datasheet with complete property values for SCHULAMID® 6 GB 30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
30% glass bead reinforced Polyamide 6 with higher stiffness and dimension stability
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Filler / Reinforcement 
  • Glass Bead, 30% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Surface Finish
  • Low Warpage
  • Oil Resistant
  
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • PA6-GB30
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Water Absorption (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Viscosity Number
cm³/g
 ISO 307
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1A/1
Tensile Stress (Break)
psi
 ISO 527-2/1A/5
Tensile Strain (Break)
%
 ISO 527-2/1A/5
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Flexural Strain at Flexural Strength
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/Bf
264 psi, Unannealed
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Ball Pressure Test (221°F)
 
 IEC 60695-10-2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
V
 IEC 60112
Flammability
Nominal Value
Unit
Test Method
Burning Rate
in/min
 ISO 3795
Flammability Classification
     IEC 60695-11-10, -20
0.0591 in
 
  
0.118 in
 
  
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 6 GB 30, SCHULAMID 6 GB 30, SCHULAMID® , SCHULAMID, SCHULAMID6GB30, 6 GB 30, 6GB, GB30, 6GB30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, A. Schulman Eur, Polyamide6, Nylon6, GB6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Surface Finish, Low Warpage, Low Warp.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.