SCHULAMID® 6 MKF 4015 A. Schulman Eur Polyamide 6 (Glass\Mineral, 40%)

Product Description

40% glass fiber and mineral reinforced Polyamide 6 with high tensile strain at break and high dimension stability

General

Material Status

Availability

Filler / Reinforcement

Features

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Water Absorption (Saturation, 73°F)		%	ISO 62
Viscosity Number		cm³/g	ISO 307
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1A/1
Tensile Stress (Break)		psi	ISO 527-2/1A/5
Tensile Strain (Break)		%	ISO 527-2/1A/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/Bf
264 psi, Unannealed		°F	ISO 75-2/Af
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Comparative Tracking Index		V	IEC 60112
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SCHULAMID® 6 MKF 4015, SCHULAMID 6 MKF 4015, SCHULAMID® , SCHULAMID, SCHULAMID6MKF4015, 6 MKF 4015, 6MKF, MKF4015, 6MKF4015, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, A. Schulman Eur, Polyamide6, Nylon6, MKF6
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Low Warpage, Low Warp, Good Stiffness/Toughness Balance, Balanced Stiffness/Toughness, Good Processability, Easy Processing.

Notes

¹Typical properties: these are not to be construed as specifications.

SCHULAMID® 6 MKF 4015