IDES Prospector Already have an account? Login Here

IDES

Borecene™ RM8345

Linear Medium Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borecene™ RM8345 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borecene RM8345 is a third generation linear medium density black polyethylene for rotational moulding. The narrow molecular weight imparted through metallocene catalyst technology provides an ideal balance of flow and physical properties. Borecene RM8345 is a black version of Borecene RM8343, and is particularly suitable for diesel fuel tanks. Borecene RM8345 is delivered as powder.

Borecene RM8345 is suitable for rotational moulding of black products such as:
  • Tanks for agricultural purposes
  • Water Tanks (suitable in contact with drinking water)
  • Parts for pipe systems
  • Diesel and oil tanks

Borecene RM8345 contains 1% Carbon Black, which is compounded into the polymer. In addition the grade contains an UV stabiliser which gives excellent UV-stability. The polymer contains long-term antioxidant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
  • Carbon Black (10000 ppm)
  • UV Stabilizer
Features 
  • Antioxidant
  • Good UV Resistance
  • Narrow Molecular Weight Distribution
  • Recyclable Material
  
Uses 
  • Agricultural Tanks
  • Fuel Tanks
  • Tanks
Appearance 
  • Black
Forms 
  • Powder
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance
hr
 ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Compression Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Compression Molded)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
ARM Impact - Total Penetration Energy 3 (-40°F, 0.14 in)
ft·lb
 ARM
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Brittleness Temperature
°F
 ISO 974
Additional Information
Full Notch Creep-Test (3,5 MPa, 50 °C), (Igepal 2 %): 200 h ISO 16770
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borecene™ RM8345, Borecene RM8345, Borecene™ , Borecene, BoreceneRM8345, RM 8345, RM8345, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, Borealis, PolyethyleneLinearMediumDensity, 8345RM
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Narrow Molecular Weight Distribution, Narrow MW Distribution.
Uses
Uses may also be described by the following terms: Fuel Tanks, Agricultural Tanks.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Height: 2.1 m, Striker: 4.5 kg
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.