IDES Prospector Already have an account? Login Here

IDES

Borecene™ RM7402

Linear Medium Density Polyethylene

Supplied by Borealis AG

The technical datasheet with complete property values for Borecene™ RM7402 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Borecene RM7402 is a third-generation linear medium-density natural polyethylene for rotational moulding. The narrow molecular weight distribution imparted through metallocene catalyst provides an ideal balance of flow and physical properties. Lower MFR enhances melt strength, making the grade ideal for foam and large/thick wall applications. The product is delivered as pellets.

Borecene RM7402 The additivation is specially formulated for rotational moulding, the polymer is fully UV stabilised and contain long-term antioxidant
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  • South America
Additive 
  • Antioxidant
  • UV Stabilizer
  
Features 
  • Antioxidant
  • Foamable
  • Good Flow
  • Good Melt Strength
  • Good UV Resistance
  • Narrow Molecular Weight Distribution
  • Recyclable Material
Uses 
  • Foam
  • Piping
  • Tanks
  • Thick-walled Parts
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Environmental Stress-Cracking Resistance 2
hr
 ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ISO 527-2/1
Tensile Stress (Yield, Compression Molded)
psi
 ISO 527-2/50
Tensile Strain (Yield, Compression Molded)
%
 ISO 527-2/50
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
ARM Impact - Total Penetration Energy 4 (-40°F, 0.14 in)
ft·lb
 ARM
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Brittleness Temperature
°F
 ISO 974
Additional Information
Full Notch Creep-Test (3,5 MPa, 50 °C), (Igepal 2 %): 120 h ISO 16770
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borecene™ RM7402, Borecene RM7402, Borecene™ , Borecene, BoreceneRM7402, RM 7402, RM7402, Polyethylene, Linear Medium Density, Polyethylene Linear Medium Density, LMDPE, Polyethylene, PE, Borealis, PolyethyleneLinearMediumDensity, 7402RM
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Narrow Molecular Weight Distribution, Narrow MW Distribution, Good Flow, Good Melt Strength.
Uses
Uses may also be described by the following terms: Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts, Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
2lgepal 10 %
30.079 in/min
4Height: 2.1 m, Striker: 4.5 kg
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.