IDES Prospector Already have an account? Login Here

IDES

Adstif HA722J

High Crystallinity Polypropylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adstif HA722J is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Adstif" HA 722 J is a high crystallinity polypropylene homopolymer, which features an extremely high stiffness, high gloss, good transparency and maintaining mechanical properties even at high temperatures. It is designed for BOPP and cast film applications where high rigidity and very good thermal characteristics are required. Main applications include flowers and textile packaging, sterilizable and pasteurizable food packaging, printing lamination, tobacco film and tensilised adhesive tapes.
"Adstif" HA 722 J is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Crystalline
  • Food Contact Acceptable
  • High Clarity
  • High Gloss
  • High Heat Resistance
  • High Rigidity
  • Homopolymer
  • Ultra High Stiffness
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Food Packaging
  • Stationary Supplies
  
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain
     ISO 527-2/50
Yield
%
  
Break
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Haze (0.787 mil)
%
 ASTM D1003
Additional Information
Typical Film Properties of monolayer film produced on T.M. Long equipment, a laboratory simultaneous film stretcher:
-Tensile Tangent Modulus (0-1%), MA 18068, 5 mm/min, 20 µ: 3200 MPa
-Stress at Break, MA 18068, 50 mm/min, 20 µ: 135 MPa
-Elongation at Break, MA 18068, 50 mm/min, 20 µ: 21%
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adstif HA722J, Adstif , AdstifHA722J, HA 722 J, HA722J, HA722, 722J, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, LyondellBasell, PolypropyleneHighCrystallinity, PPHighCrystal, 722HA
Features
Features may also be described by the following terms: High Clarity, High Gloss, High Heat Resistance, High Rigidity, Ultra High Stiffness.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film, Cast Film, Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.