Marlex PP AGM-250 Phillips Sumika Polypropylene Impact Copolymer

General

Material Status

Commercial: Active

Availability

North America

Features

Impact Copolymer

Low Temperature Impact Resistance

Uses

Automotive Interior Trim

Forms

Pellets

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ASTM D1238, ISO 1133
Molding Shrinkage (73°F, 48 hr, 0.0630 in)		%	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength
Yield, Injection Molded²		psi	ASTM D638
Yield, Injection Molded		psi	ISO 527-2/50
Flexural Modulus
Secant: Injection Molded³		psi	ASTM D790
Injection Molded⁴		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact
73°F, Injection Molded			ASTM D256
-40°F, Injection Molded		ft·lb/in²	ISO 180
73°F, Injection Molded		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness
R-Scale, Injection Molded			ASTM D785
R-Scale			ISO 2039-2
Durometer Hardness (Shore D, Injection Molded)			ASTM D2240, ISO 868
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed, Injection Molded		°F	ASTM D648
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed, Injection Molded		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® PP AGM-250, Marlex PP AGM250, Marlex® PP , Marlex PP, MarlexPPAGM250, MarlexPP, AGM, PPAGM-250, PPAGM250, PPAGM:250, PPAGM/250, PPAGM+250, PPAGM_250, PPAGM 250, PPAGM, AGM-250, AGM250, AGM:250, AGM/250, AGM+250, AGM_250, AGM 250, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Phillips Sumika, PolypropyleneImpactCopolymer, PPImpactCopolymer, 250AGM, 250PPAGM
Features
Features may also be described by the following terms: Impact Copolymer, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.

Injection	Nominal Value	Unit
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Injection Notes
Melt temperature above 500°F (260°C) may cause degredation and changes to resin properties. First stage injection pressure: Maximize Screw speed: 30 to 60% Packaging pressure: Minimize

Marlex® PP AGM-250

Polypropylene Impact Copolymer

Supplied by Phillips Sumika Polypropylene Company