IDES Prospector Already have an account? Login Here

IDES

Marlex® PP HGV-090

Polypropylene Homopolymer

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® PP HGV-090 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • UV Stabilizer
Features 
  • Food Contact Acceptable
  • Good UV Resistance
  • Homopolymer
Uses 
  • BCF Yarn
  • Fabrics
  • Fibers
  • Filaments
  • Food Packaging
  • Nonwovens
Agency Ratings 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.125 in, Injection Molded)
psi
 ASTM D638
Flexural Modulus - Secant 3 (0.125 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Durometer Hardness (Shore D, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® PP HGV-090, Marlex PP HGV090, Marlex® PP , Marlex PP, MarlexPPHGV090, MarlexPP, HGV, PPHGV-090, PPHGV090, PPHGV:090, PPHGV/090, PPHGV+090, PPHGV_090, PPHGV 090, PPHGV, HGV-090, HGV090, HGV:090, HGV/090, HGV+090, HGV_090, HGV 090, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Phillips Sumika, PolypropyleneHomopolymer, PPHomopolymer, 090HGV, 090PPHGV
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Food Packaging, BCF Yarn, Non-wovens, Non-woven, Nonwoven, Nonwovens.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.