IDES Prospector Already have an account? Login Here

IDES

Marlex® PP HHX-007

Polypropylene Homopolymer

Supplied by Phillips Sumika Polypropylene Company

The technical datasheet with complete property values for Marlex® PP HHX-007 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
  • Homopolymer
  
Uses 
  • Automotive Under the Hood
  • Blow Molding Applications
  • Tanks
Automotive Specifications 
 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.125 in, Injection Molded)
psi
 ASTM D638
Flexural Modulus - Secant 3 (0.125 in, Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, Injection Molded)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Injection Molded)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Marlex® PP HHX-007, Marlex PP HHX007, Marlex® PP , Marlex PP, MarlexPPHHX007, MarlexPP, HHX, PPHHX-007, PPHHX007, PPHHX:007, PPHHX/007, PPHHX+007, PPHHX_007, PPHHX 007, PPHHX, HHX-007, HHX007, HHX:007, HHX/007, HHX+007, HHX_007, HHX 007, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Phillips Sumika, PolypropyleneHomopolymer, PPHomopolymer, 007HHX, 007PPHHX
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1), GM (1).
Injection
Nominal Value
Unit
 
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Injection Notes
Stock Temperature: 440 - 500°F (227 - 260°C)
First stage injection pressure: Maximize
Screw speed: 30 to 60%
Packaging Pressure: Minimize
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.