|
The value listed as CLTE, ASTM 696, was tested in accordance with ASTM E831.
Heat Sag, ASTM D3769, 152mm (6 in) Overhang, 30min, @ 180°F: 0.5in
Tear Resistance, ASTM D624, Die C, 508mm (20in)/min, @ 73°F: 850 to 970lb/in
Gardner Impact, ASTM D3209, -22°F: >320 in-lb
Rheometric Impact, ultimate energy, 5mph, 1/2in dia. Tup, 3in dia. Ring, 73°F: 194 in-lb
Rheometric Impact, ultimate energy, 5mph, 1/2in dia. Tup, 3in dia. Ring, -22°F: 159 in-lb3
Elongation at Break, ASTM D638, 73°F: >400%
Flexural Modulus, Tangent, 73°F, ASTM D790: 95 to 110 kpsi
Specific Gravity, 73°F, ASTM D792: 0.96 to 0.97
Tensile Strength, 73°F, ASTM D638: 2800 to 3200 psi
Shrinkage, ASTM D955: 0.75 to 1.2%
Coefficient of Linear Thermal Expansion, -22 to 176°F, ASTM E831: 4.2 to 5.0 x 10^-5
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bexloy® W, Bexloy W, Bexloy® , Bexloy, BexloyW, Ionomer, DuPont P&IP
|
|
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant, Good Wear Resistance, Wear Resistant, Stain Resistant, Resists Stains, Scratch Resistant, Resists Scratches, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, High Gloss, Good Colorability, Good Color Stability, Good Abrasion Resistance, Abrasion Resistant.
|