IDES Prospector Already have an account? Login Here

IDES

Elvaloy® AC 1214

Ethylene Methyl Acrylate Copolymer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Elvaloy® AC 1214 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
14% Methyl Acrylate
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Copolymer
  • Good Flexibility
  • Good Heat Seal
  • Soft
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Coextrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Stress
      
Yield
psi
 ISO 527-2/500
-- 3
psi
 ASTM D638
Tensile Elongation
      
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/500
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240, ISO 868
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50, ASTM D1525 4
Melting Temperature
°F
 DSC, ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elvaloy® AC 1214, Elvaloy AC 1214, Elvaloy® , Elvaloy, ElvaloyAC1214, AC 1214, AC1214, Ethylene Methyl Acrylate Copolymer, EMA, Thermoplastic Elastomer, TPE, DuPont P&IP, EthyleneMethylAcrylateCopolymer, ThermoplasticElastomer, 1214AC
Features
Features may also be described by the following terms: Good Heat Seal, Good Flexibility, Flexible.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.039 in/min
320 in/min
4Rate A (50°C/h), Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.