IDES Prospector Already have an account? Login Here

IDES

Elvaloy® AC 3108

Ethylene n-Butyl Acrylate Copolymer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Elvaloy® AC 3108 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
7% Butyl Acrylate
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Additive 
  • Antiblock
  • Antioxidant
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Copolymer
  • Low Temperature Impact Resistance
  • Slip
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238, ISO 1133
Films
Nominal Value
Unit
Test Method
Tensile Strength
    ISO 527-3/500
MD
psi
 
TD
psi
 
Tensile Elongation
    ISO 527-3/500
MD: Break
%
 
TD: Break
%
 
Elmendorf Tear Strength
    ISO 6383-2
MD
lbf
 
TD
lbf
 
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
ASTM D2457
Haze
%
ASTM D1003
Additional Information
Stress @ Break, ISO 527-3, 500 mm/min, MD: 24 MPa
Stress @ Break, ISO 527-3, 500 mm/min, TD: 18 MPa
Dart Drop, ISO 7765/1A: 300 g
COF, ISO 8295, dynamic, MD: 0.15
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elvaloy® AC 3108, Elvaloy AC 3108, Elvaloy® , Elvaloy, ElvaloyAC3108, AC 3108, AC3108, Ethylene n-Butyl Acrylate Copolymer, Ethylene nButyl Acrylate Copolymer, Ethylene n:Butyl Acrylate Copolymer, Ethylene n/Butyl Acrylate Copolymer, Ethylene n+Butyl Acrylate Copolymer, Ethylene n_Butyl Acrylate Copolymer, Ethylene n Butyl Acrylate Copolymer, EnBA, Thermoplastic Elastomer, TPE, DuPont P&IP, EthylenenButylAcrylateCopolymer, ThermoplasticElastomer, Ethylenen_ButylAcrylateCopolymer, 3108AC
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Antiblocking, Unspecified Antiblock.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
 
Cylinder Zone 3 Temp.
°F
 
Cylinder Zone 5 Temp.
°F
 
Adapter Temperature
°F
 
Die Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.