Latamid® 12 H FE90 Lati Polyamide 12 (Magnetite Filler)

Product Description

Compound based on Polyamide 12 (PA 12).
Heat stabilised. Magnetizable filler. Product UL certified.

General

Material Status

Availability

Filler / Reinforcement

Additive

Features

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²			ISO 294-4
Across Flow: 0.0787 in		%
Flow: 0.0787 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2/1
Tensile Stress (Break, 73°F)		psi	ISO 527-2/5
Tensile Strain (Break, 73°F)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact (73°F, 0.126 in)		ft·lb/in	ASTM D256A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (86 to 212°F)		in/in/°F	ASTM D696
Continuous Use Temperature³		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Latamid® 12 H FE90, Latamid 12 H FE90, Latamid® , Latamid, Latamid12HFE90, 12 H FE 90, 12 H FE90, 12H, HFE, FE90, 12HFE90, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Lati, Polyamide12, Nylon12, H12
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.

Notes

¹Typical properties: these are not to be construed as specifications.

²at 60 Mpa of cavity pressure

³20000 hr

Latamid® 12 H FE90