IDES Prospector Already have an account? Login Here

IDES

Ultramid® 8267G HS BK-102

Polyamide 6

Glass Fiber Reinforcement, 15%; Mineral Filler, 25%

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® 8267G HS BK-102 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid 8267G HS BK-102 is a heat stabilized, black pigmented, 40% mineral and glass fiber reinforced PA6 injection molding compound. It possesses a balance of engineering properties in combination with excellent dimensional stability, low warp and resistance to sink-mark formation. It exhibits high strength, rigidity, and good heat distortion temperature. It resists creep under load and the heat stabilizer system extends its retention of properties at elevated temperatures. It has good chemical resistance to greases, oils and hydrocarbons.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 15% Filler by Weight
  • Mineral Filler, 25% Filler by Weight
  
Additive 
  • Heat Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Chemical Resistance
  • Good Creep Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • Good Thermal Aging Resistance
  • Heat Stabilized
  • High Strength
  • Low Viscosity
  • Low Warpage
  • Semi Crystalline
  • Warp Resistant
Uses 
  • Automotive Applications
  • Automotive Exterior Parts
  • Gears
  • Handles
  • Lawn and Garden Equipment
  • Power/Other Tools
  • Wheels
Agency Ratings 
RoHS Compliance 
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
  
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity        
--
--
 
 ASTM D792
--
--
lb/in³
 ISO 1183 2
Molding Shrinkage - Flow (0.125 in)
--
in/in
 ASTM D955
Water Absorption        
24 hr
--
%
 ASTM D570
73°F, 24 hr
--
%
 ISO 62
Saturation
--
%
 ASTM D570, ISO 62 2
Equilibrium, 50% RH
--
%
 ASTM D570
Equilibrium
--
%
 ISO 62 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus        
-40°F
--
psi
 ISO 527-2
176°F
--
psi
 ISO 527-2
250°F
--
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Strength        
Break, 73°F
psi
 ASTM D638
Break
psi
 ISO 527-2 2
Tensile Elongation        
Break, 73°F
%
 ASTM D638
Break
%
 ISO 527-2 2
Flexural Modulus        
73°F
--
psi
 ASTM D790
73°F
psi
 ISO 178
Flexural Strength        
73°F
--
psi
 ASTM D790
73°F
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength       ISO 179/1eA 2
-22°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Charpy Unnotched Impact Strength (73°F)
--
ft·lb/in²
 ISO 179
Notched Izod Impact        
73°F
--
ft·lb/in
 ASTM D256
-40°F
--
ft·lb/in²
 ISO 180
73°F
--
ft·lb/in²
 ISO 180
Drop Impact Resistance (73°F)
--
ft·lb
 Internal Method
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (R-Scale)
--
 
 ASTM D785
Ball Indentation Hardness
--
psi
 ISO 2039-1
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load        
66 psi
--
°F
 ISO 75-2 2
264 psi, Unannealed
--
°F
 ASTM D648
264 psi
--
°F
 ISO 75-2 2
Melting Temperature
--
°F
 ASTM D3418, ISO 3146
CLTE        
Flow
--
in/in/°F
 ASTM E831, ISO 11359-2
Transverse
--
in/in/°F
 ISO 11359-2
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity        
0.0591 in
--
ohm·cm
 ASTM D257
--
--
ohm·in
 IEC 60093 2
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL (0.0591 in)
--
 
 UL 94
UL
Dry
Conditioned
Unit
Test Method
RTI Str (0.0591 in)
--
°F
 UL 746
RTI Imp (0.0591 in)
--
°F
 UL 746
RTI Elec (0.0591 in)
--
°F
 UL 746
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 8267G HS BK-102, Ultramid 8267G HS BK102, Ultramid® , Ultramid, Ultramid8267GHSBK102, 8267 G HS BK, 8267G HS BK, 8267 G HS BK 102, 8267GHSBK, 8267G HS BK-102, 8267G HS BK102, 8267G HS BK:102, 8267G HS BK/102, 8267G HS BK+102, 8267G HS BK_102, 8267G HS BK 102, 8267G, GHS, HSBK, BK102, 8267GHSBK102, 8267GHSBK_102, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G8267
Generic Name
Dry
Generic Name may also be described by the following terms: PA6.
Conditioned
Generic Name may also be described by the following terms: PA6.
Features
Dry
Features may also be described by the following terms: Good Stiffness, Good Dimensional Stability, Dimensionally Stable, Good Creep Resistance, Creep Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Warpage, Low Warp, Warp Resistant, Warpage Resistant, High Strength, Good Surface Finish, Good Abrasion Resistance, Abrasion Resistant, Good Chemical Resistance, Chemical Resistant, Semi-Crystalline, Good Flow, Good Processability, Easy Processing, Good Thermal Aging Resistance, Thermal Aging Resistant, Low Viscosity.
Uses
Dry
Uses may also be described by the following terms: Power Tools, Tools, Automotive Applications, Automotive Sector, Lawn and Garden Equipment, Lawn Equipment, Garden Equipment.
Automotive Specifications
Dry
This plastic material has approval for 36 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (24), CHRYSLER (2), DELPHI (1), DAEWOO (1), FORD (7), CHEVROLET (1).
Agency Ratings
Dry
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ULC (1).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® 8267G HS BK-102, Ultramid 8267G HS BK102, Ultramid® , Ultramid, Ultramid8267GHSBK102, 8267 G HS BK, 8267G HS BK, 8267 G HS BK 102, 8267GHSBK, 8267G HS BK-102, 8267G HS BK102, 8267G HS BK:102, 8267G HS BK/102, 8267G HS BK+102, 8267G HS BK_102, 8267G HS BK 102, 8267G, GHS, HSBK, BK102, 8267GHSBK102, 8267GHSBK_102, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, G8267
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.