IDES Prospector Already have an account? Login Here

IDES

Adsyl 5 X 37 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adsyl 5 X 37 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adsyl 5 X 37 F is an advanced polyolefin, specially designed for use as a sealing layer in co-extruded film applications.
This grade features a high flow and a very low seal initiation temperature.
It contains slip and anti-block additives.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Food Contact Acceptable
  • High Flow
  • Low Temperature Heat Sealability
  • Slip
Uses 
  • Bi-axially Oriented Film
  • Cast Film
  • Food Packaging
  • Laminates
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Coextruded Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Flexural Modulus
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Seal Initiation Temperature
°F
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adsyl 5 X 37 F, Adsyl , Adsyl5X37F, 5 X 37 F, 5X, X37, 37F, 5X37F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, X5
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Low Temperature Heat Sealability, Low Temperature Heat Seal, High Flow, High Melt, High MFI, Antiblocking, Unspecified Antiblock.
Uses
Uses may also be described by the following terms: Cast Film, Bi-axially Oriented Film, Biaxially Oriented Film, Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.