IDES Prospector Already have an account? Login Here

IDES

Adflex Q 300 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex Q 300 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex Q 300 F is a thermoplastic polyolefin which has been developed for the extrusion or calendering of soft film. Adflex Q 300 F can also be used as impact/toughener modifier of polypropylene homopolymer in extrusion applications. In strapping applications for instance, it notably decreases fibrillation and improves the processability of the film at high drawing ratios. Adflex Q 300 F can be processed on any conventional PP extrusion line as well as on PVC calendars. It can also be blown on standard LDPE or LLDPE film lines.

For regulatory compliance information see the Adflex Q 300F Regulatory Affairs Product Stewardship Information/Certification Data Sheet (RAPIDS), which can be found on www.polymers.lyondellbasell.com.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Food Contact Acceptable
  • Good Flexibility
  
Uses 
  • Bags
  • Bottles
  • Film
  • Tubing
  
Agency Ratings 
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Film Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-2/25
0.00197 in 2
psi
  
0.00197 in 3
psi
  
Tensile Stress
      
Yield
psi
 ISO 527-2
Break, 0.00197 in 2
psi
 ISO 527-2/500
Break, 1.97 in 3
psi
 ISO 527-2/500
Tensile Strain
      
Across Flow: Yield, 0.00197 in
%
 ISO 527-2/500
Flow: Yield, 0.00197 in
%
 ISO 527-2/500
Break
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Elongation at Break 4
     ISO 527-3
MD
%
  
TD
%
  
Tensile Strength at Yield 4
     ISO 527-3
MD
psi
  
TD
psi
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-58°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex Q 300 F, Adflex , AdflexQ300F, Q 300 F, Q300, 300F, Q300F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 300Q
Features
Features may also be described by the following terms: Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
2TD
3MD
4500mm/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.