IDES Prospector Already have an account? Login Here

IDES

Adflex Q 100 F

Polyolefin

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex Q 100 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex Q 100 F is a thermoplastic polyolefin, which is mainly used by our customers for the extrusion of blown film. It is also suitable for sheet extrusion.

Adflex Q 100 F features very high softness and very low modulus. It does not contain any slip or anti-blocking agents. Adflex Q 100 F is ideal for the production of soft hygienic film and heavy duty film, as well as for the modification of LDPE or LLDPE to increase mechanical characteristics, puncture resistance, and to allow further downgauging. It can be easily processed on conventional LDPE or LLDPE blown film lines.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Features 
  • Good Flexibility
  • Good Processability
  • Good Tear Strength
  • Low Temperature Impact Resistance
  • Puncture Resistant
  • Soft
Uses 
  • Agricultural Applications
  • Bags
  • Film
  • Food Packaging
  • Laminates
  • Packaging
  • Shrink Wrap
  • Tubing
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Double-Bubble Film
  • Extrusion Blow Molding
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Films
Nominal Value
Unit
Test Method
Tensile Modulus     ISO 527-3/25
MD: 2.0 mil
psi
  
TD: 2.0 mil
psi
  
Tensile Stress     ISO 527-3/500
MD: Yield, 2.0 mil
psi
  
TD: Yield, 2.0 mil
psi
  
MD: Break, 2.0 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation     ISO 527-3/500
MD: Yield, 2.0 mil
%
  
TD: Yield, 2.0 mil
%
  
MD: Break, 2.0 mil
%
  
TD: Break, 2.0 mil
%
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength     ISO 180/1A
-4°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Haze (1.97 mil, Cast Film)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex Q 100 F, Adflex , AdflexQ100F, Q 100 F, Q100, 100F, Q100F, Polyolefin, Unspecified, Polyolefin Unspecified, Polyolefin, LyondellBasell, PolyolefinUnspecified, 100Q
Features
Features may also be described by the following terms: Good Flexibility, Flexible, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Processability, Easy Processing, Good Puncture Resistance, Puncture Resistant, Good Tear Strength.
Uses
Uses may also be described by the following terms: Food Packaging, Tubing, Tube, Shrink Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.