IDES Prospector Already have an account? Login Here

IDES

Moplen COAT EP/60 BIANCO

Polypropylene Copolymer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Moplen COAT EP/60 BIANCO is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Moplen" COAT EP/60 BIANCO is a UV and thermal stabilized polypropylene copolymer, designed for extrusion.
It is developed for continuous service at high temperature (to be designed case by case, but typically in the -20°C/+120°C temperature range for on-shore projects and up to +145°C for offshore projects).
This product offers good resistance to impact, indentation, environmental stress cracking, chemicals, fungi and bacteria, as well as good stiffness and low water absorption.
This grade is available in white, in pellet form.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Heat Stabilizer
  • UV Stabilizer
  
Features 
  • Bacteria Resistant
  • Copolymer
  • Fungus Resistant
  • Good Chemical Resistance
  • Good Impact Resistance
  • Good Stiffness
  • High ESCR (Stress Crack Resist.)
  • Low to No Water Absorption
Uses 
  • Pipe Coatings
Appearance 
  • White
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Extrusion Coating
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Moplen COAT EP/60 BIANCO, Moplen COAT EP60 BIANCO, Moplen , MoplenCOATEP60BIANCO, COAT EP, COAT EP/60 BIANCO, COAT EP60 BIANCO, COAT EP:60 BIANCO, COAT EP+60 BIANCO, COAT EP-60 BIANCO, COAT EP_60 BIANCO, COAT EP 60 BIANCO, COATEP, EP60, 60BIANCO, COATEP60BIANCO, COATEP_60BIANCO, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, EPCOAT
Features
Features may also be described by the following terms: Low Water Absorption, Low Moisture Absorption, Water Resistant, Moisure Resistant, Good Stiffness, Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.