Moplen COAT EP BIANCO LyondellBasell Polypropylene Copolymer

Product Description

Moplen COAT EP BIANCO is a UV and thermal stabilized polypropylene copolymer designed for extrusion.
It is developed for continuous service at high temperature (to be defined case by case, but typically in the -20°C/+110°C temperature range for on-shore projects and up to 130°C for off-shore projects).
It offers good resistance to impact, indentation, environmental stress cracking, chemicals, fungi and bacteria, as well as good stiffness and low water absorption.
This grade is available in white, in pellet form.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

Additive

Heat Stabilizer

UV Stabilizer

Features

Bacteria Resistant

Copolymer

Fungus Resistant

Good Chemical Resistance

Good Impact Resistance

Good Stiffness

Heat Stabilized

High ESCR (Stress Crack Resist.)

Low to No Water Absorption

Uses

Pipe Coatings

Appearance

White

Forms

Pellets

Processing Method

Extrusion

Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength			ISO 180/1A
-4°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306/A50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel Product names can be difficult to match. You may have searched any one of these terms to find this product: Moplen COAT EP BIANCO, Moplen , MoplenCOATEPBIANCO, COAT EP BIANCO, COATEP, EPBIANCO, COATEPBIANCO, Polypropylene Copolymer, PP Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneCopolymer, PPCopolymer, EPCOAT
Features
Features may also be described by the following terms: Low Water Absorption, Low Moisture Absorption, Water Resistant, Moisure Resistant, Good Stiffness, Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Chemical Resistance, Chemical Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Moplen COAT EP BIANCO

Polypropylene Copolymer

Supplied by LyondellBasell Industries