IDES Prospector Already have an account? Login Here

IDES

Adstif HA612M

High Crystallinity Polypropylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adstif HA612M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Adstif" HA612M is a high crystallinity polypropylene homopolymer with an extremely high stiffness, good transparency and outstanding high temperature performances. It is especially designed for cast film applications where high rigidity, transparency and very good thermal characteristics are required.
"Adstif" HA612M is particularly recommended for the production of coex film for Twist Wrapping on high speed packaging lines. Other applications include flowers and textile packaging, sterilizable and pasteurizable food packaging.
"Adstif" HA612M does not contain neither slip nor antiblocking agents and is suitable for metallisable films. It is Calcium Stearate free
"Adstif" HA612M is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Features 
  • Crystalline
  • Food Contact Acceptable
  • High Clarity
  • High Rigidity
  • High Temperature Strength
  • Homopolymer
Uses 
  • Cast Film
  • Film
  • Food Packaging
  • Packaging
  • Stationary Supplies
Forms 
  • Pellets
Processing Method 
  • Cast Film
  • Coextruded Film
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD 2 (2.0 mil, Cast Film)
psi
 ASTM D882
Tensile Strength - MD 3
     ASTM D882
Yield, 2.0 mil, Cast Film
psi
  
Break, 2.0 mil, Cast Film
psi
  
Tensile Elongation - MD 3
     ASTM D882
Yield, 2.0 mil, Cast Film
%
  
Break, Cast Film
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Cast Film)
 
 ASTM D2457
Haze (1.97 mil, Cast Film)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adstif HA612M, Adstif , AdstifHA612M, HA 612 M, HA612M, HA612, 612M, Polypropylene, High Crystallinity, Polypropylene High Crystallinity, PP, High Crystal, PP High Crystal, Polypropylene, PP, LyondellBasell, PolypropyleneHighCrystallinity, PPHighCrystal, 612HA
Features
Features may also be described by the following terms: High Temperature Strength, High Clarity, High Rigidity.
Uses
Uses may also be described by the following terms: Cast Film, Food Packaging.
Notes
1Typical properties: these are not to be construed as specifications.
20.98 in/min
320 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.