IDES Prospector Already have an account? Login Here

IDES

Clyrell RC215M

Polypropylene Random Copolymer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Clyrell RC215M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Clyrell" RC215M is a alpha olefin modified polypropylene random copolymer especially designed for cast film technology. It offers an excellent clarity and gloss, a very low haze, a wide hot tack range and a low seal-initiation temperature of 120°C. It is designed for quality packaging applications, either as monolayer film or as welding layer in coextruded structures. "Clyrell" RC215M is easy processable on commercial cast film equipment. It contains slip and antiblock additives.
"Clyrell" RC215M is suitable for food contact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Additive 
  • Antiblock
  • Slip
  
Features 
  • Antiblocking
  • Food Contact Acceptable
  • High Clarity
  • High Gloss
  • Low Temperature Heat Sealability
  • Random Copolymer
  • Slip
Uses 
  • Cast Film
  • Film
  • Packaging
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Yield)
psi
 ISO 527-2/50
Tensile Strain
     ISO 527-2/50
Yield
%
  
Break
%
  
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic, Cast Film
 
  
vs. Itself - Static, Cast Film
 
  
Films
Nominal Value
Unit
Test Method
Secant Modulus - MD 2 (2.0 mil, Cast Film)
psi
 ASTM D882
Tensile Strength - MD 3
     ASTM D882
Yield, 2.0 mil, Cast Film
psi
  
Break, 2.0 mil, Cast Film
psi
  
Tensile Elongation - MD 3 (Break, 2.0 mil, Cast Film)
%
 ASTM D882
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Optical
Nominal Value
Unit
Test Method
Gloss (1.97 mil, Cast Film)
 
 ASTM D2457
Haze (1.97 mil, Cast Film)
%
 ASTM D1003
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Clyrell RC215M, Clyrell , ClyrellRC215M, RC 215 M, RC215M, RC215, 215M, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, LyondellBasell, PolypropyleneRandomCopolymer, PPRandomCopolymer, 215RC
Features
Features may also be described by the following terms: Slip, Unspecified Slip, Antiblocking, Unspecified Antiblock, High Gloss, Random Copolymer, High Clarity, Low Temperature Heat Sealability, Low Temperature Heat Seal.
Uses
Uses may also be described by the following terms: Cast Film.
Notes
1Typical properties: these are not to be construed as specifications.
20.98 in/min
320 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.