IDES Prospector Already have an account? Login Here

IDES

Hifax 5519/1

Polypropylene

Mineral Filler

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hifax 5519/1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
"Hifax" 5519/1 is a PP/EPR-Blend, mineral filled, impact modified.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Additive 
  • Impact Modifier
Features 
  • Impact Modified
Uses 
  • Automotive Bumper
Automotive Specifications 
Appearance 
  • Colors Available
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage     ISO 2554
Across Flow
%
  
Flow
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2/50
Tensile Strain (Break, 73°F)
%
 ISO 527-2/50
Flexural Modulus 2 (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength     ISO 180/1A
-22°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A50
CLTE - Flow 3 (86 to 185°F)
in/in/°F
 DIN 53752
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hifax 5519/1, Hifax 55191, Hifax , Hifax55191, 5519, 5519/1, 55191, 5519:1, 5519+1, 5519-1, 5519_1, 5519 1, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, LyondellBasell, PolypropyleneUnspecified, PPUnspecified, 15519
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Bumper, Automotive Bumpers.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
3Final Part
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.