NORYL PPX* PPX640 Resin SABIC IP Euro Polyphenylene Ether + PS + PP (Glass Fiber Reinforcement, 40%)

Product Description

PPX640 is a 40% glass filled alloy of PP and PPO providing design freedom for applications requiring a wide range of stiffness, toughness and temperature. NSF Standard 61 Compliant (color limited). Generic identification acc. ISO11469: >PP+PPE-I-GF40<

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 40% Filler by Weight

Features

Good Stiffness

Good Toughness

Agency Ratings

RoHS Compliance

Processing Method

Injection Molding

Part Marking Code (ISO 11469)

>PP+PPE-I-GF40<

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Break)		psi	ISO 527-2/5
Tensile Strain (Break)		%	ISO 527-2/5
Flexural Modulus²		psi	ISO 178
Flexural Strength^2, 3		psi	ISO 178
Taber Abrasion Resistance (1000 Cycles, 1000 g, CS-17 Wheel)		mg	Internal Method
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength⁴			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength⁴			ISO 179/1eU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Notched Izod Impact Strength⁵			ISO 180/1A
-22°F		ft·lb/in²
73°F		ft·lb/in²
Unnotched Izod Impact Strength⁵			ISO 180/1U
-22°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness (H 358/30)		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature⁶
66 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Be
264 psi, Unannealed, 3.94 in Span		°F	ISO 75-2/Ae
Vicat Softening Temperature
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Ball Pressure Test (257°F)			IEC 60695-10-2
CLTE			ISO 11359-2
Flow: 73 to 140°F		in/in/°F
Transverse: 73 to 140°F		in/in/°F
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
50 Hz
60 Hz
1 MHz
Dissipation Factor			IEC 60250
50 Hz
60 Hz
1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength (0.126 in, in Oil)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Glow Wire Flammability Index (0.126 in)		°F	IEC 60695-2-12
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL PPX* PPX640 Resin, NORYL PPX PPX640 Resin, NORYL PPX* , NORYL PPX, NORYLPPXPPX640Resin, NORYLPPX, PPX 640 Resin, PPX640 Resin, PPX640, 640Resin, PPX640Resin, Polyphenylene Ether + PS + PP, Polyphenylene Ether PS PP, Polyphenylene Ether : PS : PP, Polyphenylene Ether / PS / PP, Polyphenylene Ether - PS - PP, Polyphenylene Ether _ PS _ PP, Polyphenylene Ether PS PP, PPE+PS+PP, PPEPSPP, PPE:PS:PP, PPE/PS/PP, PPE-PS-PP, PPE_PS_PP, PPE PS PP, Polyphenylene Ether, PPE, SABIC IP Euro, PolyphenyleneEtherPSPP, PolyphenyleneEther, PolyphenyleneEther_PS_PP, 640PPX
Features
Features may also be described by the following terms: Good Stiffness, Good Toughness, Tough.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): NSF (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Hopper Temperature		°F
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²0.079 in/min

³Break

⁴80*10*4 sp=62mm

⁵80*10*4

⁶120*10*4 mm

NORYL PPX* PPX640 Resin

Polyphenylene Ether + PS + PP

Glass Fiber Reinforcement, 40%

Supplied by SABIC Innovative Plastics Europe