IDES Prospector Already have an account? Login Here

IDES

DIC.PPS FZ-2130

Polyphenylene Sulfide

Glass Fiber Reinforcement, 30%

Supplied by DIC Corporation

The technical datasheet with complete property values for DIC.PPS FZ-2130 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
  • Outline: FZ-2130 is a 30% glass fiber reinforced linear polyphenylene sulfide compound that is well balanced with excellent mechanical properties and processability.
  • Color: Black
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Good Processability
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Water Absorption (73°F, 24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Poisson's Ratio
 
  
Coefficient of Friction 2
     ASTM D1894
vs. Steel - Dynamic
 
  
vs. Steel - Static
 
  
Flexural Elongation at Break
%
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
     ASTM D785
M-Scale
 
  
R-Scale
 
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE
     ASTM D696
Flow: -22 to 194°F
in/in/°F
  
Transverse: -22 to 194°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.0630 in)
V/mil
 ASTM D149
Dielectric Constant (1 MHz)
 
 ASTM D150
Dissipation Factor (1 MHz)
 
 ASTM D150
Arc Resistance
sec
 ASTM D495
Comparative Tracking Index
V
 ASTM D3638
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
UL File Number
 
  
Related Terminology
This supplier and product may also be known by these terms: Dainippon Ink and Chemicals, Incorporated

Product names can be difficult to match. You may have searched any one of these terms to find this product: DIC.PPS FZ-2130, DICPPS FZ2130, DIC.PPS , DICPPS, DICPPSFZ2130, FZ, FZ-2130, FZ2130, FZ:2130, FZ/2130, FZ+2130, FZ_2130, FZ 2130, Polyphenylene Sulfide, PPS, DIC, PolyphenyleneSulfide, 2130FZ
Features
Features may also be described by the following terms: Good Processability, Easy Processing.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2P=150KPa, V=0.3m/s
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.