IDES Prospector Already have an account? Login Here

IDES

REMEX* VR4060 Resin

Polybutylene Terephthalate

Glass Fiber Reinforcement, 32%

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for REMEX* VR4060 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
32% Glass filled PBT, Utility grade, Black color only
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 32% Filler by Weight
Appearance 
  • Black
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow  3
in/in
  
Across Flow  2
in/in
  
Across Flow  4
in/in
  
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 5 (Break)
psi
 ASTM D638
Flexural Modulus 6 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 6 (Break, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
CLTE - Flow
     ASTM E831
-40 to 104°F
in/in/°F
  
140 to 280°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
     ASTM D149
0.0630 in, in Oil
V/mil
  
0.126 in, in Oil
V/mil
  
Dielectric Constant
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Arc Resistance (PLC) 7
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0579 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: REMEX* VR4060 Resin, REMEX VR4060 Resin, REMEX* , REMEX, REMEXVR4060Resin, VR 4060 Resin, VR4060 Resin, VR4060, 4060Resin, VR4060Resin, Polybutylene Terephthalate, PBT, Polyester, SABIC IP, PolybutyleneTerephthalate, 4060VR
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
21.5 to 3.2 mm
33.2 to 4.6 mm
43.2-4.6 mm
5Type I, 0.20 in/min
60.051 in/min
7Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.