IDES Prospector Already have an account? Login Here

IDES

POLYAXIS® CP 812

Medium Density Polyethylene

Supplied by A. Schulman Inc.

The technical datasheet with complete property values for POLYAXIS® CP 812 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Long term UV8 stabilization
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Long Term UV-8 Stabilizer
Automotive Specifications 
Appearance 
  • Colors Available
Forms 
  • Pellets
  • Powder
 
Processing Method 
  • Rotational Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
 
ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)
hr
ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 3 (Yield, Rotational Molded)
psi
ASTM D638
Tensile Elongation 3 (Break, Rotational Molded)
%
ASTM D638
Flexural Modulus - 1% Secant (Rotational Molded)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Impact Strength (-40°F, 0.125 in, Rotational Molded)
ft·lb
ARM
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed, Rotational Molded)
°F
ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (Any Color)
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: POLYAXIS® CP 812, POLYAXIS CP 812, POLYAXIS® , POLYAXIS, POLYAXISCP812, CP 812, CP812, Polyethylene, Medium Density, Polyethylene Medium Density, MDPE, Polyethylene, PE, A. Schulman, PolyethyleneMediumDensity, 812CP
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Compression Molded
32.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.