IDES Prospector Already have an account? Login Here

IDES

Adell PS IF-110

High Impact Polystyrene

Supplied by Adell Plastics, Inc.

The technical datasheet with complete property values for Adell PS IF-110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adell PS IF-110 is a flame retardant impact polystyrene concentrate. IF-110 is a cost effective material to be used in high impact polystyrene applications where UL rating of V-0 is critical.

The concentrate is typically mixed with HIPS at a ratio of two parts of base resin with one part of IF-110 to obtain a V-0 rating at 1/16" for the molded product.

The physical properties of the concentrate have been engineered to produce molded parts from HIPS and the concentrate blend that have properties similar to those molded of HIPS.

The property data of test bars produced from two parts HIPS and one part IF-110 is shown on this datasheet.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Flame Retardant
  • High Impact Resistance
  
Uses 
  • Electrical Housing
  • Housings
  
Appearance 
  • Black
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/1.2 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1U
Gardner Impact
in·lb
 ASTM D3029
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Adell PS IF-110, Adell PS IF110, Adell PS , AdellPSIF110, AdellPS, IF, PSIF-110, PSIF110, PSIF:110, PSIF/110, PSIF+110, PSIF_110, PSIF 110, PSIF, IF-110, IF110, IF:110, IF/110, IF+110, IF_110, IF 110, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, Adell, PolystyreneHighImpact, PSHIPS, 110IF, 110PSIF
Features
Features may also be described by the following terms: High Impact Resistance.
Uses
Uses may also be described by the following terms: Housings, Housing, Electrical Housings, Electrical Housing.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.