IDES Prospector Already have an account? Login Here

IDES

NAXALOY® 793A3 GF10

Polycarbonate + Polyester

Glass Fiber Reinforcement, 10%

Supplied by MRC Polymers, Inc.

The technical datasheet with complete property values for NAXALOY® 793A3 GF10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 10% Filler by Weight
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Molding Shrinkage
    ASTM D955
Flow: 0.126 in
in/in
 
Across Flow: 0.126 in
in/in
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break, 0.126 in)
psi
ASTM D638
Tensile Elongation (Break, 0.126 in)
%
ASTM D638
Flexural Modulus (0.126 in)
psi
ASTM D790
Flexural Strength (0.126 in)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
    ASTM D648
66 psi, Unannealed
°F
 
264 psi, Unannealed
°F
 
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0579 in)
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: NAXALOY® 793A3 GF10, NAXALOY 793A3 GF10, NAXALOY® , NAXALOY, NAXALOY793A3GF10, 793 A 3 GF 10, 793A3 GF10, 793A, A3, 3GF, GF10, 793A3GF10, Polycarbonate + Polyester, Polycarbonate Polyester, Polycarbonate : Polyester, Polycarbonate / Polyester, Polycarbonate - Polyester, Polycarbonate _ Polyester, Polycarbonate Polyester, PC+Polyester, PCPolyester, PC:Polyester, PC/Polyester, PC-Polyester, PC_Polyester, PC Polyester, Polycarbonate, PC, MRC Polymers, PolycarbonatePolyester, Polycarbonate_Polyester, A793
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Dew Point
°F
 
Suggested Max Moisture
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Injection Rate
 
 
Back Pressure
psi
 
Screw Speed
rpm
 
Cushion
in
 
Injection Notes
Air Flow Rate: 0.8 to 1.0 CFM per lb/hr resin processed
Packing Pressure: 50 to 75% of injection pressure
Hold Pressure: 40 to 60% of inection pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.