Celstran PA66-SF6-02 Ticona Polyamide 66 (Stainless Steel Fiber, 6.0%)

Product Description
6% stainless steel reinforced nylon 6/6
General
Material Status	Commercial: Active
Availability	North America
Filler / Reinforcement	Stainless Steel Fiber, 6.0% Filler by Weight
RoHS Compliance
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage			ASTM D955
Flow		in/in
Across Flow		in/in
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
73°F		psi	ASTM D638
--		psi	ISO 527-2/1A/1
Tensile Strength
Break, 73°F		psi	ASTM D638
Break		psi	ISO 527-2/1A/5
Tensile Elongation
Break, 73°F		%	ASTM D638
Break		%	ISO 527-2/1A/5
Flexural Modulus
73°F		psi	ASTM D790
73°F		psi	ISO 178
Flexural Strength
73°F		psi	ASTM D790
73°F		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact (73°F)		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed)		°F	ASTM D648
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	ASTM D257
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® PA66-SF6-02, Celstran PA66SF602, Celstran® , Celstran, CelstranPA66SF602, PA 66, PA 66 SF 6 02, PA66-SF6-02, PA66SF602, PA66:SF6:02, PA66/SF6/02, PA66+SF6+02, PA66_SF6_02, PA66 SF6 02, PA66, 66SF, SF6, 602, Polyamide 66, Nylon 66, Polyamide, Nylon, Ticona, Polyamide66, Nylon66, 66PA
Generic Name
Generic Name may also be described by the following terms: PA66.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.

Celstran® PA66-SF6-02