IDES Prospector Already have an account? Login Here

IDES

KRASTEN 562 EF

High Impact Polystyrene

Supplied by KAUCUK, a.s. - UNIPETROL GROUP

The technical datasheet with complete property values for KRASTEN 562 EF is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • High Impact Resistance
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1A/1
Tensile Stress
     ISO 527-2/1A/50
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Strain (Break, 73°F)
%
 ISO 527-2/1A/50
Flexural Strength 2 (73°F, 0.157 in)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1U
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A120
--
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity (50 Hz)
 
 IEC 60250
Dissipation Factor (50 Hz)
 
 IEC 60250
Electric Strength (0.157 in, in Oil)
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.118 in)
 
 UL 94
Glow Wire Ignition Temperature (0.118 in)
°F
 IEC 60695-2-13
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: KRASTEN 562 EF, KRASTEN , KRASTEN562EF, 562 EF, 562EF, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, Kaucuk, PolystyreneHighImpact, PSHIPS, EF562
Features
Features may also be described by the following terms: High Impact Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.