IDES Prospector Already have an account? Login Here

IDES

SEP™ Nanocomposite Nylon 12

Polyamide 12

Supplied by Foster Corporation

The technical datasheet with complete property values for SEP™ Nanocomposite Nylon 12 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Flame Retardant
  • Good Stiffness
  • Medium Rigidity
Uses 
  • Film
  • Tubing
  
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (275°C/5.0 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ASTM D638
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
50% Strain
psi
  
100% Strain
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SEP™ Nanocomposite Nylon 12, SEP Nanocomposite Nylon 12, SEP™ , SEP, SEPNanocompositeNylon12, Nanocomposite Nylon 12, NanocompositeNylon, Nylon12, NanocompositeNylon12, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Foster, Polyamide12, NylonNanocomposite
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Good Stiffness, Medium Rigidity, Good Rigidity.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.