Celstran PA66-GF30-02 Ticona Polyamide 66 (Long Glass Fiber, 30%)

Product Description
30% long glass fiber reinforced, heat stabilized, Nylon 6/6
General
Material Status	Commercial: Active
Availability	North America
Filler / Reinforcement	Long Glass Fiber, 30% Filler by Weight
Additive	Heat Stabilizer
Features	Heat Stabilized
RoHS Compliance
Automotive Specifications
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage			ASTM D955
Flow		in/in
Across Flow		in/in
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus
-40°F		psi	ASTM D638
73°F		psi	ASTM D638
250°F		psi	ASTM D638
--		psi	ISO 527-2/1A/1
Tensile Strength
Break, -40°F		psi	ASTM D638
Break, 73°F		psi	ASTM D638
Break, 250°F		psi	ASTM D638
Break		psi	ISO 527-2/1A/5
Tensile Elongation
Break, -40°F		%	ASTM D638
Break, 73°F		%	ASTM D638
Break, 250°F		%	ASTM D638
Break		%	ISO 527-2/1A/5
Flexural Modulus
-40°F		psi	ASTM D790
73°F		psi	ASTM D790
250°F		psi	ASTM D790
73°F		psi	ISO 178
Flexural Strength
-40°F		psi	ASTM D790
73°F		psi	ASTM D790
250°F		psi	ASTM D790
73°F		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eA
Notched Izod Impact			ASTM D256
-40°F		ft·lb/in
73°F		ft·lb/in
300°F		ft·lb/in
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load
264 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® PA66-GF30-02, Celstran PA66GF3002, Celstran® , Celstran, CelstranPA66GF3002, PA 66, PA 66 GF 30 02, PA66-GF30-02, PA66GF3002, PA66:GF30:02, PA66/GF30/02, PA66+GF30+02, PA66_GF30_02, PA66 GF30 02, PA66, 66GF, GF30, 3002, Polyamide 66, Nylon 66, Polyamide, Nylon, Ticona, Polyamide66, Nylon66, 66PA
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1).

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Celstran can be processed on a standard injection molding unit. A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering. A free flowing check ring assembly is recommended.

Notes

¹Typical properties: these are not to be construed as specifications.

Celstran® PA66-GF30-02

Polyamide 66

Long Glass Fiber, 30%

Supplied by Ticona