IDES Prospector Already have an account? Login Here

IDES

Celstran® TPU-GF30-01-US

Thermoplastic Polyurethane Elastomer

Long Glass Fiber, 30%

Supplied by Ticona

The technical datasheet with complete property values for Celstran® TPU-GF30-01-US is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
30% long strand glass fiber reinforced thermoplastic polyurethane
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Long Glass Fiber, 30% Filler by Weight
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Molding Shrinkage     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus      
73°F
psi
 ASTM D638
--
psi
 ISO 527-2/1A/1
Tensile Strength      
Break, 73°F
psi
 ASTM D638
Break
psi
 ISO 527-2/1A/5
Tensile Elongation      
Break, 73°F
%
 ASTM D638
Break
%
 ISO 527-2/1A/5
Flexural Modulus      
73°F
psi
 ASTM D790
73°F
psi
 ISO 178
Flexural Strength      
73°F
psi
 ASTM D790
73°F
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648, ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Celstran® TPU-GF30-01-US, Celstran TPUGF3001US, Celstran® , Celstran, CelstranTPUGF3001US, TPU, TPU GF 30 01 US, TPU-GF30-01-US, TPUGF3001US, TPU:GF30:01:US, TPU/GF30/01/US, TPU+GF30+01+US, TPU_GF30_01_US, TPU GF30 01 US, TPUGF, GF30, 3001, 01US, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, Ticona, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, GFTPU
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Celstran can be processed on a standard injection molding unit.
A general purpose metering screw is recommended with a zone
distribution of 40% feed, 40% transition, and 20% metering.
A free flowing check ring assembly is recommended.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.