Geon™ Fiberloc™ 97520 PolyOne Polyvinyl Chloride, Rigid (Glass Fiber Reinforcement, 20%)

General

Material Status

Availability

Filler / Reinforcement

Features

Uses

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
PVC Cell Classification			ASTM D4216
PVC Cell Classification			ASTM D1784
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus²		psi	ASTM D638
Tensile Strength² (Yield)		psi	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256A
73°F, 0.125 in, Injection Molded		ft·lb/in
Across Flow: 73°F, 0.125 in, Compression Molded		ft·lb/in
Flow: 73°F, 0.125 in, Compression Molded		ft·lb/in
Drop Impact Resistance			ASTM D4226
73°F³		in·lb/mil
73°F⁴		in·lb/mil
Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, 15 sec)			ASTM D2240
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)		°F	ASTM D648
CLTE - Flow		in/in/°F	ASTM D696
Additional Information
Note: The Cell Classification was determined using the notched Izod test with injection molded samples.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Fiberloc™ 97520, Geon Fiberloc 97520, Geon™ Fiberloc™ , Geon Fiberloc, GeonFiberloc97520, GeonFiberloc, 97520, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride
Features
Features may also be described by the following terms: High Stiffness, Low CLTE, Reduced CLTE.

Injection	Nominal Value	Unit
Processing (Melt) Temp		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I, 0.20 in/min

³Procedure A, C.125 Dart

⁴Procedure B, C.125 Dart

Geon™ Fiberloc™ 97520