Zytel 101 NC010 DuPont Polyamide 66

Product Description

Zytel® 101 NC010 is a general purpose polyamide 66 resin for injection molding and extrusion.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Features

Good Chemical Resistance

Good Electrical Properties

Good Wear Resistance

Ultrasonic Weldable

Uses

Filaments

RoHS Compliance

Automotive Specifications

Appearance

Natural Color

Processing Method

Extrusion

Filament Extrusion

Injection Molding

Part Marking Code (ISO 11469)

>PA66<

Resin ID (ISO 1043)

PA66

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity
--		--		ASTM D792
--		--	g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/1.2 kg)		--	in³/10min	ISO 1133
Molding Shrinkage
Flow: 0.126 in		--	in/in	Internal Method
Across Flow: 0.0787 in		--	%	ISO 294-4
Flow: 0.0787 in		--	%	ISO 294-4
Water Absorption
73°F, 24 hr		--	%	ASTM D570
Saturation, 73°F		--	%	ASTM D570, ISO 62
Equilibrium, 73°F, 50% RH		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Strength
Yield, -40°F			psi	ASTM D638
Yield, 73°F			psi	ASTM D638
Yield, 171°F			psi	ASTM D638
Yield, 250°F			psi	ASTM D638
Yield, 73°F			psi	ISO 527-2
-40°F			psi	ASTM D638
73°F			psi	ASTM D638
171°F			psi	ASTM D638
250°F			psi	ASTM D638
Tensile Elongation
Yield, -40°F		--	%	ASTM D638
Yield, 73°F			%	ASTM D638
Yield, 171°F			%	ASTM D638
Yield, 250°F			%	ASTM D638
Yield, 73°F			%	ISO 527-2
Break, -40°F			%	ASTM D638
Break, 73°F			%	ASTM D638
Break, 171°F			%	ASTM D638
Break, 250°F			%	ASTM D638
Break, 73°F		--	%	ISO 527-2/50
Nominal Tensile Strain at Break (73°F)			%	ISO 527-2
Tensile Creep Modulus				ISO 899-1
1 hr	--		psi
1000 hr	--		psi
Flexural Modulus
-40°F			psi	ASTM D790
73°F			psi	ASTM D790
171°F			psi	ASTM D790
250°F			psi	ASTM D790
73°F			psi	ISO 178
Shear Strength (73°F)		--	psi	ASTM D732
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179/1eA
-40°F		--	ft·lb/in²
-22°F			ft·lb/in²
73°F			ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179/1eU
-22°F
73°F
Notched Izod Impact
-40°F			ft·lb/in	ASTM D256
73°F			ft·lb/in	ASTM D256
-40°F		--	ft·lb/in²	ISO 180/1A
-22°F		--	ft·lb/in²	ISO 180/1A
73°F			ft·lb/in²	ISO 180/1A
Unnotched Izod Impact Strength				ISO 180/1U
-22°F		--	ft·lb/in²
73°F
Tensile Impact Strength				ASTM D1822
73°F³			ft·lb/in²
73°F⁴			ft·lb/in²
Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness				ASTM D785
M-Scale
R-Scale
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		--	°F	ASTM D648
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ASTM D648
264 psi, Unannealed		--	°F	ISO 75-2/A
Brittleness Temperature			°F	ASTM D746
Melting Temperature⁵		--	°F	ISO 11357-3, ASTM D3418
CLTE				ASTM E831
Flow: 73 to 131°F		--	in/in/°F
Transverse: 73 to 131°F		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
73°F			ohm·cm	ASTM D257
--			ohm·cm	IEC 60093
Dielectric Strength⁶ (0.126 in)		--	V/mil	ASTM D149
Dielectric Constant
73°F, 100 Hz				ASTM D150
73°F, 1 kHz				ASTM D150
73°F, 1 MHz				ASTM D150
73°F, 100 Hz				IEC 60250
Dissipation Factor				ASTM D150
73°F, 100 Hz
73°F, 1 kHz
73°F, 1 MHz
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0280 in		--
0.0591 in		--
0.118 in		--
0.236 in		--
Flammability Classification				IEC 60695-11-10, -20
0.0280 in		--
0.0591 in		--
0.118 in		--
0.236 in		--
Glow Wire Flammability Index				IEC 60695-2-12
0.0280 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
Glow Wire Ignition Temperature				IEC 60695-2-13
0.0280 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
Oxygen Index
--			%	ASTM D2863
--		--	%	ISO 4589-2
UL	Dry	Conditioned	Unit	Test Method
RTI Str				UL 746
0.0280 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
0.236 in		--	°F
RTI Imp				UL 746
0.0280 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
0.236 in		--	°F
RTI Elec				UL 746
0.0280 in		--	°F
0.0591 in		--	°F
0.118 in		--	°F
0.236 in		--	°F
Comparative Tracking Index (CTI) (0.118 in)		--	V	UL 746
Comparative Tracking Index (CTI) (PLC) (0.118 in)		--		UL 746
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® 101 NC010, Zytel 101 NC010, Zytel® , Zytel, Zytel101NC010, 101 NC 010, 101 NC010, 101NC, NC010, 101NC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, NC101
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	Generic Name may also be described by the following terms: PA66.
Features
Dry	Features may also be described by the following terms: Good Wear Resistance, Wear Resistant, Good Chemical Resistance, Chemical Resistant, Good Electrical Properties, Ultrasonic Weldable.
Automotive Specifications
Dry	This plastic material has approval for 4 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), ASTM (1), CHRYSLER (1), GM (1).
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® 101 NC010, Zytel 101 NC010, Zytel® , Zytel, Zytel101NC010, 101 NC 010, 101 NC010, 101NC, NC010, 101NC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, NC101

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Melt Temperature, Optimum		°F
Mold Temperature		°F
Mold Temperature, Optimum		°F
Drying Recommended

Notes

¹This specification is applicable for the Americas region.

²Typical properties: these are not to be construed as specifications.

³Type L

⁴Type S

⁵10°C/min

⁶Method A (Short-Time)

Zytel® 101 NC010

NYLON RESIN

Supplied by DuPont Performance Polymers