IDES Prospector Already have an account? Login Here

IDES

AMPLIFY™ GR 205

Functional Polymer

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for AMPLIFY™ GR 205 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AMPLIFY™ GR 205 Functional Polymer is a maleic anhydride grafted (MAH) polymer. The base polymer is a high density polyethylene.

Main Characteristics:
  • Maleic anhydride grafted HDPE
  • Polymer compatibilizer
  • Adhesion promoter
  • Promotes adhesion between metal , polyolefins, cellulose, polyester, polycarbonate, glass and foil.

Complies with:
  • U.S. FDA 21 CFR 177.1520(c)6
  • EU, No 10/2011
Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Cast Film
  • Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
MAH Graft Level 2
 
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
      
Break 3
psi
 ASTM D638
Break
psi
 ISO 527-2/51
Tensile Elongation
      
Break 3
%
 ASTM D638
Break
%
 ISO 527-2/51
Flexural Modulus - 2% Secant
psi
 ASTM D790A, ISO 178
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240, ISO 868
Shore A
 
  
Shore D
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525, ISO 306
Melting Temperature (DSC)
°F
 Internal Method
Additional Information
Molded in accordance with ASTM D4976.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: AMPLIFY™ GR 205, AMPLIFY GR 205, AMPLIFY™ GR , AMPLIFY GR, AMPLIFYGR205, AMPLIFYGR, GR 205, GR205, GR, 205, Maleic Anhydride Grafted Polymer, MAH-g, MAHg, MAH:g, MAH/g, MAH+g, MAH_g, MAH g, Dow, MaleicAnhydrideGraftedPolymer, 205GR
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EU (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Low <0.25 wt %, Medium 0.25-0.5 wt %, High >0.5 wt %, Very High >1.0 wt%
32.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.