RECONYL A KV30 Frisetta Polyamide 66 (Glass Bead, 30%)

Product Description
Recycled nylon 6.6 for injection moulding, 30% glass balls reinforced (available only in black).
General
Material Status	Commercial: Discontinued
Availability	Europe
Filler / Reinforcement	Glass Bead, 30% Filler by Weight
Recycled Content	Yes
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Continuous service temperature, FRISETTA Test Method: 90°C Impact strength (+23 °C), DIN 53453: 18 kJ/m² Impact strength (-40 °C), DIN 53453: 13 kJ/m² Impact strength, notched (+23 °C), DIN 53453: 3 kJ/m² Water absorption (+23 °C), ISO 62: 1.4 to 2.4 % Water absorption at saturation (+23 °C), ISO 62: 5.5 to 6.5 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RECONYL A KV30, RECONYL , RECONYLAKV30, A KV 30, A KV30, AKV, KV30, AKV30, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Frisetta, Polyamide66, Nylon66, KVA
Generic Name
Generic Name may also be described by the following terms: PA66.

Notes

¹Typical properties: these are not to be construed as specifications.

RECONYL A KV30