IDES Prospector Already have an account? Login Here

IDES

RECONYL B KV30

Polyamide 6

Glass Bead, 30%

Supplied by FRISETTA Polymer GmbH

The technical datasheet with complete property values for RECONYL B KV30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Recycled nylon 6 for injection moulding, 30% glass balls reinforced (available only in black).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Glass Bead, 30% Filler by Weight
Recycled Content 
  • Yes
Features 
  • Good Dimensional Stability
  • High Stiffness
  • Low Warpage
Uses 
  • Machinery Maintenance/Repair
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Strength
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature (DSC)
°F
 ISO 3146
Additional Information
Temp. index applied to 50% falling of tensile strength after 20 000h, IEC 216-1: 98°C
Water absorption (+23 °C), ISO 62: 1.5 to 2.5 %
Water absorption at saturation (+23 °C), ISO 62: 6 to 7 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RECONYL B KV30, RECONYL , RECONYLBKV30, B KV 30, B KV30, BKV, KV30, BKV30, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Frisetta, Polyamide6, Nylon6, KVB
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, High Stiffness, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Machinery Maintenance/Repair, Machinery Maintenance, Machinery Repair.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Granular Clamp: <0.1%
Buildup pressure: 5-10 bar hydraulic pressure
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.