RECONYL B S Frisetta Polyamide 6

Product Description
Recycled nylon 6 for injection moulding, impact modified (available only in black).
General
Material Status	Commercial: Discontinued
Availability	Europe
Additive	Impact Modifier
Recycled Content	Yes
Features	Impact Modified
Appearance	Black
Forms	Pellets
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	ISO 294-4
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Additional Information
Continuous service temperature, FRISETTA Test Method: 75°C Impact strength (+23 °C), DIN 53453: No Break kJ/m² Impact strength (-40 °C), DIN 53453: No Break kJ/m² Impact strength, notched (+23 °C), DIN 53453: 9 kJ/m² Water absorption (+23 °C), ISO 62: 2.2 to 3.2 % Water absorption at saturation (+23 °C), ISO 62: 8 to 9 %
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RECONYL B S, RECONYL , RECONYLBS, B S, BS, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Frisetta, Polyamide6, Nylon6, SB
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

RECONYL B S