RECONYL B S20 Frisetta Polyamide 6

Product Description

Recycled nylon 6 for injection moulding, impact modified (available only in black).

Applications:
Cases, covers etc. which have a high impact strength.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Impact Modifier

Recycled Content

Features

High Impact Resistance

Impact Modified

Uses

Protective Coverings

Appearance

Black

Forms

Pellets

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption			ISO 62
Saturation, 73°F		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Yield)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Hardness	Nominal Value	Unit	Test Method
Ball Indentation Hardness		psi	ISO 2039-1
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature (DSC)		°F	ISO 3146
Temperature Index²		°F	IEC 60216
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RECONYL B S20, RECONYL , RECONYLBS20, B S 20, B S20, BS, S20, BS20, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Frisetta, Polyamide6, Nylon6, SB
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: High Impact Resistance.
Uses
Uses may also be described by the following terms: Protective Coverings, Protective Covering.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Granular clamp: < 0.1% Build up pressure: 5 to 10 bar

Notes

¹Typical properties: these are not to be construed as specifications.

²50% reduction of tensile strength after 20 000h

RECONYL B S20

Polyamide 6

Supplied by FRISETTA Polymer GmbH