IDES Prospector Already have an account? Login Here

IDES

Edistir® N 2380

General Purpose Polystyrene

Supplied by Polimeri Europa

The technical datasheet with complete property values for Edistir® N 2380 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High molecular weight general purpose polystyrene combining high heat resistance and good mechanical strength.

Suitable for direct gassing extrusion, for biaxially oriented films and sheets, for glass clear sheets and panels.
Also used in injection moulding of medium thick wall transparent parts.

Designation: Thermoplastics ISO 1622-PS,G,105-03

Uses range from foamed packaging trays, clear panels for shower cabins, insulation boards (XPS), OPS for labels and packaging to moulded fridge clear components, Petri dishes, technical parts.

N 2380 is certified UL94 HB "all colors" at 1.5 mm (UL file E83071).

This grade in its natural version complies by composition with the requirements set by the main Regulations for plastic materials intended for food contact (including the EEC Directive 2002/72/CE and subsequent amendments).
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Food Contact Acceptable
  • General Purpose
  • Good Strength
  • High Heat Resistance
  • High Molecular Weight
Uses 
  • Bi-axially Oriented Film
  • Clear Sheet
  • Engineering Parts
  • Medical/Healthcare Applications
  • Reinforced Panels
  • Sheet
  • Support Trays
  • Transparent or Translucent Parts
Agency Ratings 
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Film Extrusion
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
  • Thermoforming
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
  • Specific Heat vs. Temperature (ISO 11403-2)
  • Specific Volume vs Temperature (ISO 11403-2)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ISO 1133
Molding Shrinkage
%
 Internal Method
Water Absorption (73°F, 24 hr)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Flexural Strength 2
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Annealed)
°F
 ASTM D648
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
CLTE - Flow
in/in/°F
 ASTM D696
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 8302
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant (50 Hz)
 
 IEC 60250
Dissipation Factor (50 Hz)
 
 IEC 60250
Comparative Tracking Index (Solution A)
V
 IEC 60112
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0591 in, All Colors)
 
 UL 94
Glow Wire Ignition Temperature (0.0630 in)
°F
 IEC 60695-2-13
UL File Number
 
  
Additional Information
Nominal Value
Unit
Test Method
Designation
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Edistir® N 2380, Edistir N 2380, Edistir® , Edistir, EdistirN2380, N 2380, N2380, PS, Polystyrene, General Purpose, Polystyrene General Purpose, PS (GPPS), PS GPPS, Polystyrene, Polimeri Europa, PolystyreneGeneralPurpose, PSGPPS, 2380N
Features
Features may also be described by the following terms: High Molecular Weight, High MW, High Heat Resistance, Good Strength.
Uses
Uses may also be described by the following terms: Clear Sheet, Support Trays, Medical Applications, Transparent Parts, Translucent Parts, Transparent or Translucent Parts, Engineering Parts, Bi-axially Oriented Film, Biaxially Oriented Film, Reinforced Panels, Reinforced Panel.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Predrying normally not required
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
20.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.