IDES Prospector Already have an account? Login Here

IDES

FR-PET® CLR6001

Polyethylene Terephthalate

Glass Fiber Reinforcement, 30%; Glass\Talc, 30%

Supplied by WinTech Polymer Ltd.

The technical datasheet with complete property values for FR-PET® CLR6001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
  • Glass\Talc, 30% Filler by Weight
  
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Electrical Properties
  • Good Processability
  • Low Moisture Absorption
Uses 
  • Appliances
  • Automotive Applications
  • Electrical/Electronic Applications
  • Industrial Applications
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Yield)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Reverse Notch Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength 2 (0.0787 in)
V/mil
 ASTM D149
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL File Number
 
  
Additional Information
Volume Resistivity, ASTM D257, 3mm: 5e16
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: FR-PET® CLR6001, FRPET CLR6001, FR-PET® , FRPET, FR:PET®, FR/PET®, FR+PET®, FR_PET®, FR PET®, FRPETCLR6001, FR_PET, FR PET, CLR 6001, CLR6001, Polyethylene Terephthalate, PET, Polyester, WinTech, PolyethyleneTerephthalate, 6001CLR
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Electrical Properties, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.